Filter
Top Products
10BASE-T
IEEE specification for 10 Mbps Ethernet on two pairs of
Category 3, 4 or 5 twisted-pair cable. The point-to-point cable
segment can be up to 100 m (328 ft.) in length.
100BASE-FX
IEEE specifications for 100 Mbps Fast Ethernet on multimode
fiber optic cable. The maximum length for a point-to-point
connection is 2 km (1.24 mi.) in full-duplex mode, or 412 m
(0.25 mi.) in half-duplex mode.
100BASE-TX
IEEE specifications for 100 Mbps Fast Ethernet on two pairs of
Category 5 twisted-pair cable. The point-to-point cable segment
can be up to 100 m (328 ft.) in length.
ANSI/IEEE 802.3 Standard
Standard developed by the ANSI/IEEE (American National
Standards Institute/Institute of Electrical and Electronics
Engineers) for the physical and electrical connections in
Ethernet local area networks.
ANSI/IEEE 802.3u Standard
Standard developed by the ANSI/IEEE (American National
Standards Institute/Institute of Electrical and Electronics
Engineers) for the physical and electrical connections in Fast
Ethernet local area networks.
BOOTP
Boot protocol used to load the operating system for devices
connected to the network.
GLOSSARY
D-2