Filter
Top Products
Configuration:
System Configuration: Shows basic IP setup and identifies
system by name, location and contact.
SNMP Configuration: Configures communities and trap
managers.
Password Configuration: Sets Administrator and User
passwords.
Virtual LAN Configuration: Assigns switch ports to form up to
8 independent LAN groups.
Port Configuration: Disables/enables any port; sets communi-
cation mode for any port; sets aging time for address table
entries; sets switching mode: enables/disables flow control.
Spanning Tree Configuration: Enables/disables Spanning Tree
Algorithm. Also sets Spanning Tree parameters, port
priority and path cost.
Console Configuration: Sets communication parameters for
console port.
Download & Reset:
TFTP Download: In-band download of updated firmware.
Serial Download: On-board download of updated firmware.
Reset: Resets hardware or configuration parameters, clears
MAC address table.
LOGOFF: Exits program and discontinues communications.
4-9
CONFIGURATION AND MANAGEMENT