Filter
Top Products
Equipment Checklist
Package Contents
In addition to this user guide, the package should contain:
◆ one (1) TigerSwitch 100 switch
• Model SMC6608T (8 10BASE-T/100BASE-TX ports)
or
• Model SMC6608M (2 4-port module slots with protective
covering plates)*
◆ two (2) brackets with screws for rack mounting the unit
◆ four (4) rubber foot pads
◆ appropriate power cord(s)
◆ SMC Warranty Registration Card — be sure to complete and
return this card within 90 days
Required Rack-Mounting Equipment
Be sure to have the following equipment available when
mounting your switch in a rack:
◆ Four rack-mounting screws
◆ A screwdriver (Phillips-head or flathead, depending on the
type of screws used)
*Note: Be sure to install the module(s) you are planning to use in this unit
before you proceed with mounting the switch and applying power.
Please refer to the installation guide included with each module for
specific installation instructions.
3-3
INSTALLATION