Filter
Top Products
Virtual LAN Configuration
Switches do not inherently support broadcast domains. Use the
Virtual LAN Configuration screen (Figure 4-7) to assign any port
on the switch to up to 8 broadcast domain groups*. All ports
on the switch are assigned to a single group by default.
Figure 4-8. Virtual LAN Configuration Screen
1. Highlight “Virtual LAN Configuration” in the Main Menu
and press <ENTER> to access the configuration screen
illustrated above.
2. Highlight the setting under the appropriate group column for
the chosen port. Press <ENTER> to use the arrow keys to
toggle between joining the port to, or disjoining the port
from, the selected group. Press <ENTER> again to confirm
the choice.
3. Repeat Step 2 for each port, as needed.
*Note: The Spanning Tree Algorithm will be automatically disabled if two or
more groups are configured.
CONFIGURATION AND MANAGEMENT
4-18
Port Grouping Configuration
Port Group1 Group2 Group3 Group4 Group5 Group6 Group7 Group8
1 Yes No No No No No No
2 Yes No No No No No No No
3 Yes No No No No No No No
4 Yes No No No No No No No
5 Yes No No No No No No No
6 Yes No No No No No No No
7 Yes No No No No No No No
8 Yes No No No No No No No
Return to Previous Menu
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to the Main Menu