Filter
Top Products
Port Status
This screen displays the current status of each port on the
switch.
Figure 4-10. Port Status Screen
Port Status Screen Items
4-22
CONFIGURATION AND MANAGEMENT
Parameter Description
Media Type Displays Port type (100BASE-FX, etc.)
Enabled Shows whether the port is enabled
Link Indicates whether a device is attached to the port
and is transmitting a link pulse signal
Speed Indicates at what speed port is operating
Duplex Indicates whether the port is running in full- or
half-duplex mode
AgTime Time (in sec.) after which unused addresses will
be discarded from address table
SwhMode Shows the method chosen for data packet
forwarding (i.e., cut-through, fragment-free, etc.)
FlowCntl Shows whether Flow Control is enabled
Port Status
Port MediaType Enabled Link Speed Duplex AgTime SwhMode
FlowCntl
1 TX Yes Up 10M Half 300 A-CT Yes
2 TX Yes Down --- --- --- --- ---
3 TX Yes Up 10M Full 300 CT No
4 TX Yes Up 100M Half 300 A-CT Yes
5 FX Yes Up 100M Half 300 A-CT Yes
6 FX Yes Up 100M Full 300 CT No
7 TX Yes Up 100M Half 300 FgFree Yes
8 TX Yes Up 10M
Half300 S&F Yes