Filter
Top Products
System Parameter Configuration
1. Highlight “System Configuration” in the Main Menu and
press <ENTER>. This will access the System Configuration
Screen (See below).
Figure 4-5. System Configuration Screen
2. Highlight “System Name” and press <ENTER> to assign a
name to identify the switch if the default entry (see above) is
not suitable. Press <ENTER> again to confirm entry.
3. Highlight “System Location” and press <ENTER> to input
the physical location of the switch. Press <ENTER> again to
confirm entry.
4. Highlight “System Contact” and press <ENTER> to specify
the party to contact in the event of a switch malfunction.
Press <ENTER> again to confirm entry.
5. Highlight “IP Address” and press <ENTER> to assign an IP
address to the switch. Press <ENTER> again to confirm
entry.
CONFIGURATION AND MANAGEMENT
4-12
System Configuration
System Name SMC TigerSwitch 100
System Location MIS
System Contact SMC Technical Support Dept.
192.72.24.31
Default Gateway 192.72.24.202
Subnet Mask 255.255.255.0
IP State BootP When Needed
Send Ping
Return to Previous Menu
Use cursor keys to choose item. Press <ENTER> to confirm choice.
Press <CTRL><N> to return to Main Menu