Filter
Top Products
4-20
CONFIGURATION AND MANAGEMENT
Status LEDs
LEDs Functions
Power Indicates that the switch is receiving power.
RPU Indicates that the optional Redundant Power
Unit is supplying power to the switch.
Status Indicates that the LED array is displaying status
information for each port (This is the default
display mode).
Tx/Rx (60%) Indicates that the port is
transmitting or receiving
data. (Blinking)
LED 100Mbps (30%) Indicates that the port is set
Array to operate at 100 Mbps.
(Unlit = 10 Mbps)
Full-Duplex (10%) Indicates that the port is set
to operate in full-duplex
mode. (Unlit = half-duplex)
Select/Link (1%) Indicates a valid network
connection.
Forward % Indicates that the LED array is displaying the
percentage of all packets forwarded by each
port to another port.
Utilization % Indicates that the LED array is displaying the
percentage of LAN bandwidth being utilized
by each port.
Collision % Indicates that the LED array is displaying the
percentage of packets in collision relative to the
total number packets transmitted by each port.
Full/Half Indicates that the transmission mode for each
port may be manually set to full- or half-duplex.
Diagnostic Indicates that the unit is running internal
diagnostic tests.