Filter
Top Products
2
2-2
Hand-held Monitor User’s Guide – June 1994
GFK-0121E
Using the 230VAC Power Adapter
The optional 230VAC Power Adapter (IC660MCA512) can be used to connect the Hand-
held Monitor Charger to variety of 230 VAC power outlets by means of a standard com-
puter cable (not supplied).
The Adapter has a receptacle on the top for the Hand-held Monitor Charger and an IEC
320 receptacle on the side for the computer cable.
IEC 320 receptacle in
side of Adapter
HHM Charger receptacle in
top of Adapter
Instructions
1. Set the power selection switch on the Hand-held Monitor Charger to the 230V position.
120V
230V
230V
position
2. Plug the Hand-held Monitor Charger into the top receptacle on the Power Adapter
unit.
3. Plug the computer cable into the IEC receptacle on side of the Power Adapter unit.
4. Connect the computer cable to a suitable 230VAC power source.
During normal operation, it is best to connect and disconnect the cable at the outlet, not
at the Adapter.