Filter
Top Products
3
3-3
GFK-0121E
Chapter 3 Getting Started
Displaying the Home Menu
This is the Hand-held Monitor’s Home menu:
F 1 : H H M U T I L I T I E S
F 2 : A N A L Y Z E
F 3 : C O N F I G U R A T I O N
F 4 : D E V I C E M E M O R Y
Display the Home menu by either:
A. Pressing F4 (Ok) from the first baud rate
screen, or
B. Pressing the Home key or DMenu key from a
lower-level screen.
Use the Home menu to get to any other HHM
function, as shown below.
Notice that different screens appear, depending on
the type of device that is currently communicating
with the HHM.
F1: HHM CONFIG
F2: SELF–TEST
F3: HELP
F1: MONITOR BLOCK
F2: MNTR/CTRL REF
F3: BLOCK/BUS STS
F4: PULSE TEST
F3F2F1
The Main HHM Screens
F1
F2
F3
HHM CONFIG
BLOCK NO. 0
chng nxt
F1: KEYPAD TEST
F2: DISPLAY TEST
F3: TEST INTRNALS
F4:
F1
F4
F2
F3
REFS O
O O O O O O O
A 1 0 0 0 1 1 1
MNTR/CNTL O
STATE: 0
NO FAULTS
> on off reles
REFS O
DC16K 15 v2.0ACT
FORCED, NO FAULTS
nxt prv actv bus
PULSE TEST
REFS 0
NO FAULTS
exec
F1
F2
F3
PROG BLOCK ID
I/O
BLOCK NO.
ref blk nxt
COPY CONFIG
FROM : TO :
chng entr
3 4 5 6 7 8 9 0
(individual feature
configuration
screens)
(help screens)
See page 3-4 for
instructions.
See page 3-7 for
instructions.
See page 5-4 for
instructions.
See page 5-9 for
instructions.
See page 5-2 for
instructions.
See page 5-17 for
instructions.
See page 4-4 for
instructions.
See Genius I/O
Blocks Manual or
individual block
manual for
instructions.
See page 4-6 for
instructions.
DEVICE MEMORY #
(reference)
tgl chng entr SBA
F4
See chapter 6 for
instructions.
F2
F1
F2
F1: GENIUS CONFIG
F2: Module Config
F3: Previous Menu
F1 Monitor I/O
F2:Faults
F3 Previous Menu
See page 5-15 for
instructions.
See page 4-7 for
instructions.
For Field
Control
For Most
Genius Devices
F1: HHM UTILITIES
F2: ANALYZE
F3: CONFIGURATION
F4: DEVICE MEMORY
F1: MONITOR
F2: CONFIGURATION
F1: PROG BLOCK ID
F2: CONFIG BLOCK
F3: COPY CONFIG