Filter
Top Products
Preface
Index-4
Hand-held Monitor User’s Guide – June 1994
GFK-0121E
designers, operators, maintenance
personnel, and others using Field Control
I/O modules. This book contains a
detailed description, specifications, and
installation instructions for all
currently–available I/O modules.
Series 90 -70 Bus Controller User’s
Manual (GFK-0398). Reference manual
for the Bus Controller, which interfaces a
Genius bus to a Series 90-70 PLC. This
book describes the installation and
operation of the Bus Controller. It also
contains the programming information
needed to interface Genius I/O devices to
a Series 90-70 PLC.
Series 90 -30 Bus Controller User’s
Manual (GFK-1034). Reference manual
for the Bus Controller, which interfaces a
Genius bus to a Series 90-30 PLC. This
book describes the installation and
operation of the Bus Controller. It also
contains the programming information
needed to interface Genius I/O devices to
a Series 90-30 PLC.
Series Six Bus Controller User’s
Manual (GFK-0171). Reference manual
for the Bus Controller, which interfaces a
Genius bus to a Series Six PLC. This book
describes the installation and operation of
the Bus Controller. It also contains the
programming information needed to
interface Genius I/O devices to a Series Six
PLC.
Series Five Bus Controller User’s
Manual (GFK-0248). Reference manual
for the Bus Controller, which interfaces a
Genius bus to a Series Five PLC. This book
describes the installation and operation of
the Bus Controller. It also contains the
programming information needed to
interface Genius I/O devices to a Series
Five PLC.
Genius I/O PCIM User’s Manual
(GFK-0074). Reference manual for the
PCIM, which interfaces a Genius bus to a
suitable host computer. This book
describes the installation and operation of
the PCIM. It also contains the
programming information needed to
interface Genius I/O devices to a host
computer.
Genius I/O Single-slot PCIM User’s
Manual (GFK-0881). Reference manual
for the Single-slot PCIM, which interfaces
a Genius bus to a suitable host computer.
This book describes the installation and
operation of the PCIM. It also contains the
programming information needed to
interface Genius I/O devices to a host
computer.
We Welcome Your Comments
and Suggestions
At GE Fanuc automation, we strive to
produce quality technical documentation.
After you have used this manual, please
take a few moments to complete and
return the Reader’s Comment Card
located on the next page.
Jeanne L. Grimsby
Senior Technical Writer