Filter
Top Products
Index-3
GFK-0121
E
Preface
Content of this Manual
Chapter 1. Introduction: Chapter 1
describes the Hand-held Monitor. This
chapter lists catalog numbers and
specifications. It also explains
compatibility between different versions
of the Hand-held Monitor and various
other products.
Chapter 2. Hardware Setup: Chapter 2
gives instructions for powering the HHM,
changing its EPROM, and changing its
battery pack. It also describes how to
install the HHM on a panel, and how to
install a separate HHM connector on a
bus.
Chapter 3. Getting Started: Chapter 3
explains how turn on the Hand-held
Monitor, and how to set up its features for
your application. Chapter 3 also explains
how to test the Hand-held Monitor’s
operation.
Chapter 4. Device Configuration:
Overview: Chapter 4 gives basic
instructions for using the Hand-held
Monitor to configure Genius devices.
Chapter 5. Monitoring the Bus and its
Devices: Chapter 5 explains how to use the
Hand-held Monitor to display data and
status information from other devices on
the bus. It also explains how to clear faults,
switch a dual bus, execute Pulse Testing,
and display the bus scan time.
Chapter 6. Reading CPU Memory:
Chapter 6 explains how to use the HHM
to read the contents of specified memory
locations in CPUs on the bus.
Chapter 7. Error Messages: Chapter 7
defines messages that may be displayed
during HHM startup or operation, or
device configuration.
Related Publications
For more information, refer to these
publications:
Genius I/O System User’s Manual
(GEK-90486–1). Reference manual for
system designers, programmers, and
others involved in integrating Genius I/O
products in a PLC or host computer
environment. This book provides a
system overview, and describes the types
of systems that can be created using
Genius products. Datagrams, Global Data,
and data formats are defined.
Genius Discrete and Analog Blocks User’s
Manual (GEK-90486–2). Reference
manual for system designers, operators,
maintenance personnel, and others using
Genius discrete and analog I/O blocks.
This book contains a detailed description,
specifications, installation instructions,
and configuration instructions for all
currently–available discrete and analog
blocks.
Series 90-70 Remote I/O Scanner User’s
Manual (GFK-0579). Reference manual
for the Remote I/O Scanner, which
interfaces a drop containing Series 90-70
modules to a Genius bus. Any CPU
capable of controlling the bus can be used
as the host. This book describes the
Remote I/O Scanner features,
configuration, and operation.
Genius Bus Interface Unit and Field
Processor User’s Manual (GFK-0825).
Reference manual for the Bus Interface
Unit and the Field Processor, which
interface a station containing Field
Control modules to a Genius bus. Any
CPU capable of controlling the bus can be
used as the host. This book describes the
features, configuration, and operation or a
Bus Interface Unit or Field Processor.
Field Control I/O Modules User’s Manual
(GFK-0826). Reference manual for system