Filter
Top Products
Page 12
3. Select X0 in the Interfaces drop down list.
4. Click the Accept button.
Adding a NetExtender Client Route
NetExtender allows remote clients to have seamless access to resources on your local
network.
1. Navigate to the NetExtender > Client Routes page.
2. Click the Add Client Route button.
3. Enter the IP address of the trusted network to which you would like to provide access
with NetExtender in the Destination Network field. (For example, if you are
connecting to an existing DMZ with the network 192.168.50.0/24 and you want to
provide access to your LAN network 192.168.168.0/24, you would enter
192.168.168.0).
Note: You can optionally tunnel-all SSL-VPN client traffic through the NetExtender
connection by entering 0.0.0.0 for the Destination Network and Subnet Mask.
Some operating systems or system environments do not correctly apply the 0.0.0.0
default route. If this is the case, you may also specify tunnel-all operation by using
two more specific routes as follows:
4. Enter your subnet mask in the Subnet Mask field.
5. Click the Add button to add this client route.
Route 1 Destination Network: 0.0.0.0
Subnet Mask: 128.0.0.0
Route 2 Destination Network: 128.0.0.0
Subnet Mask: 128.0.0.0