Filter
Top Products
SonicWALL SSL-VPN 2000 Getting Started Guide Page 47
Scenario C: SSL-VPN on the LAN
This section provides procedures to configure your gateway appliance based on
Scenario C. This section contains the following subsections:
• “Scenario C: Connecting to the SonicWALL UTM Appliance” on page 47
• “Scenario C: Configuring SSL-VPN -> LAN Connectivity in SonicOS Enhanced” on
page 47
• “Scenario C: Setting Public Server Access in SonicOS Standard” on page 51
• “Scenario C: Setting Public Server Access in SonicOS Enhanced” on page 52
Scenario C: Connecting to the SonicWALL UTM Appliance
1. Using a computer connected to your LAN, launch your Web browser and enter the IP
address of your existing SonicWALL UTM appliance in the Location or Address
field.
2. When the management interface displays, enter your user name and password in
the appropriate fields and press the Login button.
Note: Remember that you are logging into your SonicWALL UTM appliance, not the
SonicWALL SSL-VPN 2000. Your user name and password combination may be
different from the user name and password you recorded for your SonicWALL SSL-VPN
2000.
Scenario C: Configuring SSL-VPN -> LAN Connectivity in SonicOS
Enhanced
In order for users to access local resources through the SonicWALL SSL-VPN 2000, you
must configure your gateway device to allow an outside connection through the
SSL-VPN into your LAN.
1. In the administration interface, navigate to the Network > Address Objects page.
2. In the Address Objects section, click .