Filter
Top Products
SonicWALL SSL-VPN 2000 Getting Started Guide Page 7
Configuring Your SonicWALL SSL-VPN 2000
Once your SonicWALL SSL-VPN 2000 is connected to a computer through the
management port (X0), it can be configured through the Web-based management
interface.
This section includes the following subsections:
• “Setting Your Administrator Password” on page 7
• “Adding a Local User” on page 8
• “Setting Time Zone” on page 9
• “Configuring SSL-VPN Network Settings” on page 9
• “Configuring DNS / WINS” on page 9
• “Configuring the X0 IP address for Scenario B and Scenario C” on page 10
• “Configuring a Default Route” on page 11
• “Adding a NetExtender Client Route” on page 12
Setting Your Administrator Password
1. Navigate to the Users > Local Users page
2. Click the Configure button corresponding to the “admin” account.
Note: Changing your password from the factory default is optional but strongly
recommended. If you do change your password, be sure to keep it in a safe place. If you
lose your password, you will have to reset the SonicWALL SSL-VPN 2000 to factory
settings, losing your configuration.
4