Filter
Top Products
Page 56
Registering Your SonicWALL SSL-VPN 2000
Before You Register
Verify that the time, DNS, and default route settings on your SonicWALL SSL-VPN are
correct before you register your appliance. To verify or configure the time settings,
navigate to the System > Time page. To verify or configure the DNS setting, navigate to
the Network > DNS page. To verify or configure the default route, navigate to the
Network > Routes page.
You need a MySonicWALL account to register the SonicWALL SSL-VPN 2000. You can
create a new MySonicWALL account directly from the SonicWALL management
interface.
Note: mySonicWALL.com registration information is not sold or shared with any other
company.
Creating a MySonicWALL Account from System > Licenses
1. On the System > Licenses page, click Activate, Upgrade, or Renew services.
The License Management page is displayed.
2. If you do not have a MySonicWALL account or if you forgot your user name or
password, click the https://www.mysonicwall.com link at the bottom of the page.
The MySonicWALL User Login page is displayed.
Do one of the following:
• If you forgot your user name, click the Forgot Username? link.
• If you forgot your password, click the Forgot Password? link.
• If you do not have a MySonicWALL account, click the Not a registered user?
link.
3. Follow the instructions to activate your MySonicWALL account.
Registering with MySonicWALL
On a new SonicWALL SSL-VPN appliance or after upgrading to SonicWALL SSL-VPN
3.0 firmware from an earlier release, you can register your appliance from the
System > Licenses page.
1. If you are not logged into the SonicWALL SSL-VPN 2000 management interface, log
in with the username admin and the administrative password you set in the Setup
Wizard.
2. To navigate to the System > Licenses page, click System in the left-navigation
menu, and then click Licenses.