SonicWALL SSL-VPN 2000 Network Router User Manual


 
SonicWALL SSL-VPN 2000 Getting Started Guide Page 17
Scenario B: Connecting the SonicWALL SSL-VPN 2000
To connect the SonicWALL SSL-VPN 2000 using Scenario B, perform the following
steps:
1. Connect one end of an Ethernet cable to an unused port on your DMZ, either directly
to the OPT or X2 on your existing SonicWALL UTM appliance or to a hub or switch
on your DMZ.
Scenario B: SSL-VPN on an Existing DMZ
2. Connect the other end of the Ethernet cable to the X0 port on the front of your
SonicWALL SSL-VPN 2000. The X0 Port LED lights up green indicating an active
connection.
Continue to Step
SonicWALL UTM Appliance
Existing DMZ
X1
X0
X2
SonicWALL SSL VPN 2000
X0
Router
Switch/
Hub
Remote Users
Network Nodes
Network Node
Internet Zone
LAN
Switch/
Hub