Filter
Top Products
Page 16
Scenario B: Configuring Your Network Interface
Configure your SonicWALL SSL-VPN 2000 to connect with your SonicWALL UTM
appliance under network configurations given in Scenario B.
On your SonicWALL SSL-VPN 2000:
1. Navigate to the Network > Interfaces page.
2. Click the Configure button for the X0 port.
3. If configuring with Scenario B, enter an unused IP address in your DMZ subnet in
the IP Address field.
4. Enter your subnet mask in the Subnet Mask field.
5. Click the OK button to apply changes.