Filter
Top Products
Page 20
Configuring Your Gateway Device
Now that you have set up your SonicWALL SSL-VPN 2000, you need to configure your
gateway device to work with the SonicWALL SSL-VPN 2000. Refer to the table in
“Selecting a SonicWALL Recommended Deployment Scenario” on page 3 to determine
the proper scenario for your network configuration.
This section contains the following subsections:
• “Scenario A: SSL-VPN on a New DMZ” on page 20
• “Scenario B: SSL-VPN on Existing DMZ” on page 35
• “Scenario C: SSL-VPN on the LAN” on page 47
Scenario A: SSL-VPN on a New DMZ
This section provides procedures to configure your gateway appliance based on
Scenario A. This section contains the following subsections:
• “Scenario A: Connecting to the SonicWALL UTM Appliance” on page 20
• “Scenario A: Configuring a DMZ or OPT Port in SonicOS Standard” on page 21
• “Scenario A: Allowing WAN -> DMZ Connection in SonicOS Standard” on page 21
• “Scenario A: Allowing DMZ -> LAN Connection in SonicOS Standard” on page 23
• “Scenario A: Adding a New SSL-VPN Custom Zone in SonicOS Enhanced” on
page 27
• “Scenario A: Allowing WAN -> SSL-VPN Connection in SonicOS Enhanced” on
page 28
• “Scenario A: Allowing SSL-VPN -> LAN Connection in SonicOS Enhanced” on
page 31
Scenario A: Connecting to the SonicWALL UTM Appliance
1. Using a computer connected to your LAN, launch your Web browser and enter the IP
address of your existing SonicWALL UTM appliance in the Location or Address
field.
2. When the management interface displays, enter your user name and password in
the appropriate fields and press the Login button.
Note: Remember that you are logging into your SonicWALL UTM appliance, not the
SonicWALL SSL-VPN 2000. Your user name and password combination may be
different from the user name and password you recorded for your SonicWALL SSL-VPN
2000.