Filter
Top Products
16
Chapter 2 Installation
Installing the AIT Autoloader
The autoloader weighs about 7 kg (15.4 lb.) and has the following dimensions.
Before installing the autoloader, make sure that the surface is appropriate.
N
Note
Install the AIT autoloader on a horizontal surface near an AC power outlet. Also
leave a gap of about 150 mm (5.9 in.) behind the rear of the unit to allow air to
circulate.
Caution
Make sure that you position the AIT autoloader as indicated in the illustration.
Correct operation is not guaranteed if you place the AIT autoloader on its side.
170 mm
(6.7 in.)
350 mm (13.8 in.)
224 mm (8.8 in.)
220 mm (8.7 in.)
(including rubber
feet)
170 mm (6.7 in.)
Front
Rear
50 mm (2.0 in.)
50 mm (2.0 in.)
350 mm (13.8 in.)
150 mm
(5.9 in.)