Filter
Top Products
50
Appendix
93
Cannot detect the RVS/FWD
sensors during the
initialization MOVE.
[L ] and [9 3] appear
alternately on the message
display.
Ye s
98
Failed cartridge pickup during
GET operation. (Cannot detect
the CTRG. sensor at the end
of the GET operation.)
[L ] and [9 4] appear
alternately on the message
display.
Ye s
99
Cannot clear the GAP during
the GAP clear operation when
retrying GET.
[L ] and [9 9] appear
alternately on the message
display.
Ye s
9A
Failed to detect RVS sensor
during elevator movement of
the GET operation.
[L ] and [9 A] appear
alternately on the message
display.
Ye s
9B
Failed to detect FWD sensor
during elevator movement of
the GET operation.
[L ] and [9 B] appear
alternately on the message
display.
Ye s
9C
Detected a GAP at the end of
the PUT operation.
[L ] and [9 C] appear
alternately on the message
display.
Ye s
9D
The pass sensor cannot
detect the cartridge at the end
of the PUT operation.
[L ] and [9 D] appear
alternately on the message
display.
Ye s
9E
Failed to detect RVS sensor
during elevator movement of
the PUT operation.
[L ] and [9 E] appear
alternately on the message
display.
Ye s
9F
Failed to detect FWD sensor
during elevator movement of
the PUT operation.
[L ] and [9 F] appear
alternately on the message
display.
Ye s
A0
Detected an empty slot. [L ] and [A 0] appear
alternately on the message
display.
Ye s
A1
Cannot perform the GET
operation because the picker
contains a cartridge.
[L ] and [A 1] appear
alternately on the message
display.
Ye s
A2
Detected that all slots are
occupied.
[L ] and [A 2] appear
alternately on the message
display.
Ye s
A3
Cannot perform the PUT
operation because the picker
does not contain a cartridge.
[L ] and [A 3] appear
alternately on the message
display.
Ye s
A4
The picker made a GET
operation request while in the
RVS position.
[L ] and [A 4] appear
alternately on the message
display.
Ye s
A7
Detected a sensor anomaly.
(GAP, cartridge, or pass.)
[L ] and [A 7] appear
alternately on the message
display.
Ye s
A8
Detected a drive hardware
error.
[L ] and [A 8] appear
alternately on the message
display.
Ye s
A9
Detected a drive medium
error.
[L ] and [A 9] appear
alternately on the message
display.
Ye s
AA
Drive did not enter MOUNT
state after a lapse of three
seconds during the PUT
operation.
[L ] and [A A] appear
alternately on the message
display.
Ye s
Error code Description Display Logged