Filter
Top Products
37
Chapter 5 Cleaning the AIT Drive
Chapter
5
Cleaning the AIT Drive
Overview
This chapter explains how to clean the AIT drive.
Cleaning the AIT Drive
When the AIT drive is in need of cleaning, the CLEANING LED flashes green
and the following appears on the message display.
To clean the AIT drive, insert a cleaning cartridge (sold separately) into the
drive. Make sure that you insert the cleaning cartridge into the slot CL/8 before
you proceed.
Caution
• If there is a cartridge in the AIT drive when you begin cleaning the drive, it is
returned to its original slot before the cleaning procedure starts.
• If the 2 MAINTENANCE DIP switch at the back of the AIT autoloader is in
the off position, you are not notified when cleaning becomes necessary. By
default, this DIP switch is in the on position. In this position, you are notified
to clean the AIT drive when the AIT autoloader has been online for
approximately a week. For details, see “Setting the DIP Switches” (page 19).
1
Prepare your cleaning cartridge.
2
On the front of the AIT autoloader, press the DOOR button, open the front
door, and insert the cartridge into slot CL/8 (the lowest slot).
WARNING
CLEANING
ERROR