Filter
Top Products
38
Chapter 5 Cleaning the AIT Drive
For details about how to insert a cartridge into a slot, see “Setting
Cartridges” (page 24) in Chapter 2, “Installation”.
Caution
The AIT autoloader contains a large number of wires and parts. Do not
touch any part other than the slots inside the AIT autoloader as this may
lead to damage and/or injury.
3
Close the front door.
When you hear the door click, it is closed. Make sure that the door clicks
when you close it.
When the door is completely closed, the cartridges that you inserted into
the AIT autoloader are counted and their number is displayed on the
message display.
Caution
If cartridges protrude from slots or are otherwise improperly inserted into
slots inside the AIT autoloader, the ERROR/WARNING LED lights
orange and [0 1] appears on the message display, indicating an error, and
the front door is automatically unlocked. Open the front door and correct
any problems as necessary.
4
On the front of the AIT autoloader, press the CLEAN button for at least
three seconds.
A
IT
L
I
B
R
A
R
Y
L
I
B
-
D
8
1
CL
EAN
DOO
R
WARNING
CLEANING
ERROR
Cleaning cartridge