Filter
Top Products
41388601TH Rev.2 117 /
Printout problem Flowchart No.
Light or blurred images, or images in inappropriate color tone (Figure 6.2- A ) 1
Dark background (Figure 6.2- B ) 2
No images on print output (Figure 6.2- C ) 3
Band/stripes in black or color in the longitudinal direction (Figure 6.2- D ) 4
Band/stripes in white or irregular color in the longitudinal direction (Figure 6.2- F ) 5
Poor fusing (Images are blurred or peeled off when touched with a hand.) 6
Cyclical printout defects (Figure 6.2- E ) 7
Missing characters 8
Color misalignment 9
Printout colors different from the original 0
6.5.3 Image troubleshooting
When the printout images are not satisfactory as shown below, follow the troubleshooting
procedures given in this section.
Figure 6.2
Light or blurred
images as a whole
A
Black stripes in the
vertical direction
D
Dark background
density
B
Cyclical defect
E
Blank paper
C
White belts or
streaks in the
vertical direction
F