Filter
Top Products
3(GB)
Basic Procedures of Sampling
The basic procedures for sampling follow below. You can find the detailed
explanation for each step on the pages in parentheses.
In the acoustic space where you sample
1 Install the microphones and speakers. (page 5)
x
2 Start running the DASK-S704. (page 7)
x
3 Set the sampling frequency/period (Fs/Period), and repeat times
(Repeat) on the SETUP display. (page 12)
x
4 Rehearsal: Adjust the input level from the microphones. (page 11)
x
5 Sampling: Record the reverb data. (page 12)
x
6 Write the sampled data on the Memory Stick. (page 15)
In the recording studio, etc.
7 Recall the sampled data from the Memory Stick. (page 18)
x
8 Compile: Work on the sampled data to form the reverb program.
(page 18)
x
9 Write the compiled reverb program data on the Memory Stick. (page
23)
x
0 Reproduce the reverb program using the sampling reverb software CD-
ROM (Version 2.0). (page 30)