Filter
Top Products
22(GB)
5 Press the F4 key.
“Complete?” flashes.
EnterNo
SAMPLE
[(03)Church A ] Complete ?
[1:C12 ]
O O
14To finish compiling, press the F4 key.
The following display appears.
SAMPLE
Rehearsal
Sampling
Compile
Change MS
Save Fs data to
MS [xxxxxxxx]?
or Change MS and Press F2
EnterChange MS Exit
• To change the reverb program name or the assigned graphics, press
the F3 key (No) in place of the F4 key. The reverb program name
setting menu in step 12 returns.
15Assign the Memory Stick in which you want to store the compiled
reverb program.
Select the Memory Stick in use or another Memory Stick.
SAMPLE
Rehearsal
Sampling
Compile
Change MS
Save Fs data to
MS [xxxxxxxx]?
or Change MS and Press F2
EnterChange MS Exit
To store in the Memory Stick in use
Press the F4 key. The memory list of the Memory Stick is displayed.
Proceed to step 16.
To store in another Memory Stick
1 Change the Memory Stick to another one.
2 Press the F2 key.
“Checking MS Please wait for a few minutes.” is displayed, then the
display in step 15 appears.
3 Press the F4 key.
The memory list of the Memory Stick is displayed. Proceed to step
16.
Notes
• If the capacity of the Memory Stick in use is not sufficient, “No Space
on MS[xxxxxxxx] Delete files or Change MS and Presss F2” is
displayed. Delete unnecessary files in the Memory Stick or change
the Memory Stick.
For details, see “If the memory capacity of the Memory Stick is not
sufficient” on page 16.
• If you insert a new Memory Stick, “This MS is new Press F4 and
enter name of MS” is displayed. Name the Memory Stick.
For details, see “To name a new Memory Stick” on page 17.
Compiling
Name of the Memory Stick in use