Filter
Top Products
29(GB)
Page 2
SETUP
Enter
GoToReverb :
LCD Ctl :Contrast[44]
LCD Dim :Back Light Dim[ ON ]
Input Sel :AD
Clock Sel :Internal 48.0 kHz
Item Setting range Function
LCD Ctl Contrast 0 to 63
LCD Dim Back light Dim ON, OFF
Input Sel Digital
AD
Clock Sel Internal
Word
AES (DI)
44.1 kHz/88.2 kHz
48.0 kHz/96.0 kHz
Note
When you change the setting on the SETUP display except File or Rename
MS and press the F1 key to select the SAMPLE display, the changed data
is automatically written on the DASK-S704 Memory Stick. Therefore, if
the DASK-S704 Memory Stick is not inserted, “Licence code error Please
change Licence MS” message appears. Change to the DASK-S704
Memory Stick and press the F4 key.
Adjusts the contrast of the display.
The adjusted value is directly reflected on the display.
Turns on/off the dimmer of the display.
The setting is directly reflected on the display.
Selects the input.
Digital: Input from the DIGITAL IN connector of the DRE-S777
AD: Input from the ANALOG IN connector of the DABK-S701 A/D converter
installed in the DRE-S777
Note
The DABK-S701 A/D converter (optional) is required for selecting AD.
Selects the clock format. After selecting the option, press the F3 key to
apply the new clock format.
Select one of the clock signals: Internal, Word or AES (DI), and one of the
sampling frequencies: 44.1 kHz/88.2 kHz* or 48.0 kHz/96.0 kHz*.
Internal: Clock signal from the built-in quartz oscillator
Word: Word sync signal input to the WORD SYNC IN connector of the
DRE-S777
AES (DI): Clock signal included in the signal input to the DIGITAL IN
connector of the DRE-S777
* 88.2 kHz and 96.0 kHz are displayed only when the Fs/Period is 2Fs/5.5sec.