Filter
Top Products
16(GB)
If the memory capacity of the Memory Stick is not sufficient
SAMPLE
Rehearsal
Sampling
Compile
Change MS
No space on MS[xxxxxxxx]
Delete files or
Change MS and Press F2
DeleteChange MS No
If the capacity of the Memory Stick is not sufficient for sampling or
compiling, the message above is displayed. In this case, change the
Memory Stick to another one or delete unnecessary data in the Memory
Stick.
To change to another Memory Stick
1 Change the Memory Stick to another one having sufficient capacity.
2 Press the F2 key (Change MS).
Note
When a Memory Stick is changed, “Please insert MS” message may appear
if the DRE-S777 cannot recognize the Memory Stick. In this case, press
the F2 key again.
To delete unnecessary data
1 Press the F4 key (Delete).
The SETUP display appears.
2 Press the F2 key to select the data to be deleted.
Each time the F2 key is pressed, Fs Compiled, 2Fs Compiled and
Sampled are displayed in sequence, and the memory numbers and
memory labels of the selected data type are displayed.
Fs Compiled and 2Fs Compiled indicate the compiled data, and Sampled
indicates the sampled data.
SETUP DeleteExit
GoToReverb
Fs/Period
Repeat
File
Rename MS
(03)Church A C:12
Fs Compiled
3 Turn the jog dial to highlight the memory label to be deleted, and press
the F4 key.
“Delete this file?” is displayed.
4 To delete the data, press the F4 key.
Deleting is performed and the remaining data list is displayed.
• To cancel deleting, press the F3 key (Esc) in place of the F4 key. The
display in step 2 returns.
• To delete other data, repeat steps 2 to 4.
5 To finish deleting, press the F3 key (Exit).
The previous display returns, and you can continue sampling or
compiling.
Data type
Sampling