Filter
Top Products
32(GB)
To obtain the “Stereo in Stereo out” effect
When sampling
Perform two types of sampling using the DASK-S704.
• Sampling L12: Set the speaker in position L and direct microphones 1
and 2 forward.
• Sampling R12: Set the speaker in position R and direct microphones 1
and 2 forward.
When reproducing the reverb program
1 Connect an external mixer to the DRE-S777.
2 Set the Rev mode to “Split in 4ch out” on the SETUP display of the
sampling reverb software.
3 On the REVERB display, load the sampling L12 data to SPLIT CH1-2,
and the sampling R12 data to SPLIT CH3-4, then output the data
through the external mixer.
O
O
1
2
L
R
L12
1
2
CH1
CH1
CH2
CH3
CH4
CH2
R12
L
R
DRE-S777 External mixer
Rev mode: Split in 4ch out
Mic/speaker arrangement when sampling
Reverb Modes and Arrangement during Sampling
Block diagram for reproduction