Filter
Top Products
26(GB)
Changing the Memory Stick
You can change the Memory Stick without turning off the power, using
“Change MS” on the initial display.
1 Show the initial display of the DASK-S704.
2 Turn the jog dial to highlight “Change MS.”
SAMPLE Enter
Rehearsal
Sampling
Compile
Change MS
MS:xxxxxxxx 24MB Available
Fs/Period=Fs/5.5sec
Repeat =16
Input =AD
Clock =Internal 48.0 kHz
3 Press the F4 key.
The following display appears.
Change MSSAMPLE
Rehearsal
Sampling
Compile
Change MS
Please Change MS
and Press F4
Exit Enter
4 Change the Memory Stick as required.
5 Press the F4 key.
“Checking MS Please wait for a few minutes.” is displayed, then the
initial display resumes.
Notes
• When a Memory Stick is changed, “Please insert MS” message may
appear if the DRE-S777 cannot recognize the Memory Stick. In this
case, press the F4 key again.
• If you insert a new Memory Stick, “This MS is new Press F4 and enter
name of MS” is displayed. Name the Memory Stick.
For details, see “To name a new Memory Stick” on page 17.