Filter
Top Products
28(GB)
The Items Available in the SETUP Display
Page 1
SETUP
GoToReverb :
Fs/Period :Fs/5.5sec
Repeat :16
File :
Rename MS :xxxxxxxx
Enter
Item Setting range Function
GoToSample ––
Fs/Period Fs/5.5sec
Fs/11sec
2Fs/5.5sec
Repeat 1
16
32
64
File ––
Rename MS ––
SETUP Display
Reproduces the reverb programs sampled using the DASK-S704 or those
stored in the CD-ROM supplied with the DRE-S777 or DASK-S701/S702/
S703 sampling reverb software.
For details, see “Reproducing the Reverb Program” on page 30.
Selects the sampling frequency and sampling period.
Fs/5.5sec: To sample for 5.5 seconds with the 44.1 or 48.0 kHz sampling
frequency
Fs/11sec: To sample for 11 seconds with the 44.1 or 48.0 kHz sampling
frequency
2Fs/5.5sec: To sample for 5.5 seconds with the 88.2 or 96.0 kHz sampling
frequency
Note
The DABK-S703 expansion DSP (optional) is required for sampling with Fs/
11sec or 2Fs/5.5sec.
Selects the sampling repeat times. Normally set to 16. If there is much
background noise, set it to 32 or 64.
1 is for sampling the digital reverb signal.
Displays and deletes the files in the Memory Stick.
1 Select “File,” and the memory list is displayed in a pop-up window,
showing the files which can be deleted.
2 Press the F2 key.
The display changes Sampled (sampled data), Fs compiled (Fs data
compiled), or 2Fs compiled (2Fs data compiled). The data of the
selected type are displayed.
3 Highlight the data you want to delete using the jog dial, and press the F4
key. “Delete this file?” is displayed.
4 To delete, press the F4 key.
To cancel deleting, press the F3 key. The SETUP display returns.
Changes the name of the Memory Stick.
1 Select “Rename MS.” “Rename MS. Press F4 and enter name of MS” is
displayed.
2 Press the F4 key, and set a new name in the the MS name setting menu.
3 Press the F4 key.
Note
If you change the name of the Memory Stick, the unit recognizes the reverb
programs in the Memory Stick as new programs. Do not rename the
Memory Stick whose reverb programs have been loaded previously.