Filter
Top Products
13(GB)
4 Press the F4 key.
“Please wait for a few seconds.” is displayed, and sampling is
performed. The TSP (Time Stretched Pulse) signal is output, and
sampling is repeated by the set repeat times.
EnterSAMPLE PeakHold
Rehearsal
Sampling
Compile
Change MS
Now sampling
12/16
IN OUT
1 2 1 2
DV
0
-6
-20
-35
-60
Exit
When sampling is completed, “Finish sampling Please wait for a few
seconds.” is displayed. Then the following display appears.
SAMPLE
Rehearsal
Sampling
Compile
Change MS
Save sampled data to
MS [xxxxxxxx]?
or Change MS and Press F2
EnterChange MS Exit
5 Assign the Memory Stick in which you want to store the sampled data.
Select the Memory Stick in use or another Memory Stick.
SAMPLE
Rehearsal
Sampling
Compile
Change MS
Save sampled data to
MS [xxxxxxxx]?
or Change MS and Press F2
EnterChange MS Exit
To store in the Memory Stick in use
Press the F4 key. The memory list of the Memory Stick is displayed.
Proceed to step 6.
To store in another Memory Stick
1 Change the Memory Stick to another one.
2 Press the F2 key.
“Checking MS Please wait for a few minutes.” is displayed, then the
display in step 5 appears.
3 Press the F4 key.
The memory list of the Memory Stick is displayed. Proceed to step
6.
Notes
• If the capacity of the Memory Stick in use is not sufficient, “No
Space on MS[xxxxxxxx] Delete files or Change MS and Press F2”
is displayed. Delete unnecessary files in the Memory Stick or
change the Memory Stick.
For details, see “If the memory capacity of the Memory Stick is not
sufficient” on page 16.
• If you insert a new Memory Stick, “This MS is new Press F4 and
enter name of MS” is displayed. Name the Memory Stick.
For details, see “To name a new Memory Stick” on page 17.
Sampling repeat times
Name of the Memory Stick in use
(continued)