Filter
Top Products
Cyber-shot User Guide
PrintSearch
Before Use
Operating the camera
Shooting
Viewing
Useful shooting functions
Useful viewing functions
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Troubleshooting > Warning indicators and messages > Messages
Messages
If the following messages appear, follow the instructions.
Set Area/Date/Time.
Set the area, date, and time. If you have not used the camera for a long time, charge the internal
rechargeable battery. [Details]
Unable to use memory card. Format?
The memory card was formatted on a computer and the file format was modified.
Select [Enter], then format the memory card. You can use the memory card again; however, all
previous data on the memory card will be erased. It may take some time to finish formatting.
If the message appears again after formatting, use a different memory card.
Memory Card Error
The inserted memory card cannot be used in the camera. [Details]
Formatting failed. Format the memory card again. [Details]
Reinsert memory card.
The inserted memory card cannot be used in the camera. [Details]
The memory card is damaged.
The terminal section of the memory card is dirty.
Memory card locked.
You are using a memory card with a write-protect switch, and the switch is set to the LOCK position.
Set the switch to the recording position.
Processing...
When Long exposure noise reduction or High ISO noise reduction is underway, processing will occur
for the same amount of time that the shutter was open. You cannot do any further shooting during
this time.
Unable to display.
Images recorded with other cameras or images modified using a computer may not be able to be
displayed.
Unable to print.
You tried to mark RAW images with a DPOF mark.
246