Filter
Top Products
1-11
SRX-T420
Screw
Anode harness
Portion A
Lamp bulb
Anode harness
Anode side
Screw
Fig. 1-6b
Fig. 1-6c
Procedure
m
. Keep the serial code label affi xed on the Operating Instructions of the lamp bulb which is required for
installation.
. Keep the materials such as packaging box, case, protection sheet because they are used when disposing
of the used lamp bulb.
1. Loosen the screw and bend portion A of the anode
harness.
2. Attach the anode harness to the anode side of the lamp
bulb, then tighten the screw.
(Tightening torque: 1.2 N.m)