Filter
Top Products
Owner’s Manual Rev 1.0 Page 151 of 151
10.15 AT*E2ESC M2M Escape Sequence Guard Time
Description Command Possible responses
Set GPRS online
command guard time
AT*E2ESC=[<gt>]
•_ OK
•_ ERROR
Read the current setting
AT*E2ESC? *E2ESC: <gt>
Show if the command is
supported
AT*E2ESC=?
•_ OK
•_ ERROR
Defines a guard time for the escape sequence in GPRS to return to on-line
command mode i.e. if +++AT<CR> is received either as part of the data
stream or a terminating string from the application and no further data is
received for the duration of the guard time the modem will go into on line
command mode. This guards against the modem accidentally going into on
line command mode. The verbose format of +++AT<CR> is
<S2><S2><S2>AT<S3>.
<gt> Description
0 No guard time. Default value
1-10 Guard time in seconds