Filter
Top Products
Owner’s Manual Rev 1.0 Page 79 of 79
Perform a master reset
in the MS
AT*EMAR=<phone lock
code>
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Shows if the command
is supported or not
AT*EMAR=?
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
This command requests the MS to reset user data. The user data in the MS
will be reset to the default values. This command also unlocks the MS.
<phone lock code> Description
String Security code (phone lock code) must be verified
before performing the master reset, see also
AT+CLCK
3.14 AT*EPEE Ericsson Pin Event
Description Command Possible Responses
Requests the MS to
inform when the PIN
code has been inserted
AT*EPEE=<onoff>
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Test if the command is
supported
AT*EPEE=?
•_ *EPEE: (list of
supported <onoff>s)
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Read the current status
for PIN Code Request
AT*EPEE?
•_ *EPEE: <onoff>
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
The command requests the MS to report when the PIN code has been
inserted and accepted.
<onoff> Description
0 Request for report on inserted PIN code is not activated
(off). Default value