Filter
Top Products
Owner’s Manual Rev 1.0 Page 203 of 203
Integer GSM 03.40 TP-Command-Type. Default value is 0
<pid> Description
0-255 Protocol Identifier in integer format. Default value is 0,
according to 07.05 section 9.2.3.9
<mn> Description
Integer GSM 03.40 TP-Message-Number
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string
format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character (refer command +CSCS). Type of
address given by <toda>
<toda> Description
String type GSM 04.11 TP-Destination- Address Type-of-Address
octet in integer format (when first character of <da> is
+(IRA 43) default is 145, otherwise default is 129
<mr> Description
Integer type GSM 03.40 TP-Message-Reference in integer format
<scts> Description
String type GSM 03.40 TP-Service-Centre-Time-Stamp in time-string
format (refer to <dt>)
13.10 AT+CNMI New Message Indications to TE
PDU Mode
Description Command Possible Responses
Set new message
indication to TE
AT+CNMI=[<mode>
[,<mt>[,<bm>[,<ds
>
]]]]
•_ +CMS ERROR: <err>
•_ OK