Filter
Top Products
Owner’s Manual Rev 1.0 Page 221 of 221
13.14 AT+CSDH Show Text Mode Parameters
Only Applicable to Text Mode
Description Command Possible Responses
Set the show text mode AT+CSDH=[<show>]
•_ +CME ERROR: <err>
•_ OK
Display current settings AT+CSDH?
•_ +CSDH: <show>
•_ +CME ERROR: <err>
Show if the command is
supported
AT+CSDH=?
•_ +CSDH: (list of
supported <show>s)
•_ OK
•_ +CME ERROR: <err>
Controls whether detailed header information is shown in text mode result
codes
<show> Description
0 Do not show header values defined in commands
AT+CSCA and AT+CSMP (<sca>, <tosca>, <fo>, <vp>,
<pid> and <dcs>) nor <length>, <toda> or <tooa> in
+CMT, +CMGL, +CMGR result codes for SMS-DELIVERs
and SMS-SUBMITs in text mode; for SMS-COMMANDs in
+CMGR result code, do not show <pid>, <mn>, <da>,
<toda>, <length> or <cdata>
1 Show the values in result codes
.
13.15 AT+CSMP Set Text Mode Parameters
Only Applicable to Text Mode
Description Command Possible Responses
Set the text mode
parameters
AT+CSMP=[<fo>
[,<vp>[,<pid>
[,<dcs>]]]]
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Display current
settings
AT+CSMP?
•_ +CSMP:
<fo>,<vp>,<pid>,<dcs>
•_ +CME ERROR: <err>