Filter
Top Products
Owner’s Manual Rev 1.0 Page 194 of 194
Write message to
memory
AT+CMGW [=<oa/da>
[,<tooa/toda>[,<stat>]]
] <CR>
Text is entered <ctrl-
Z/ESC>
•_ +CMGW: <index>
•_ +CMS ERROR: <err>
•_ OK
•_ ERROR
Show if the command is
supported
AT+CMGW=?
•_ OK
•_ ERROR
Stores message (either SMS-DELIVER or SMS-SUBMIT) to memory storage
<mem2>. Memory location <index> of the stored message is returned. By
default message status will be set to ‘stored unsent’, but parameter <stat>
allows also other status values to be given. The entering of text is done as
specified in the send message command, +CMGS. If writing fails, final result
code +CMS ERROR: <err> is returned.
NOTE! - SMS-COMMANDs and SMS-STATUS-REPORTs
cannot be stored in text mode.
<stat> Description
2 Stored unsent message (only applicable to SMs)
Note!_
<oa> Description
String type GSM 03.40 TP-Originating-Address Value in string
format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character (refer command +CSCS). Type of
address given by <tooa>
Note!_
<da> Description
String type GSM 03.40 TP-Destination-Address Value in string
format; BCD numbers (or GSM default alphabet
characters) are converted to characters of the currently
selected TE character (refer command +CSCS). Type of
address given by <toda>
Note!_
<tooa> Description
String type GSM 04.11 TP-Originating-Address Type-of-Address octet
in integer format (default refer <toda>)
Note!_