Filter
Top Products
Owner’s Manual Rev 1.0 Page 71 of 71
Control and Status
3.1 ATQ Result Code Suppression
Description Command Possible Responses
Set Result Code
Suppression
ATQ[=]<value>
•_ OK
•_ ERROR
Read the current setting
ATQ? Q: <value>
Show if the command is
supported
ATQ=? Q: (list of supported
<value>s)
Determines whether or not the DCE transmits result codes to the DTE. When
result codes are being suppressed, no portion of any intermediate, final, or
unsolicited result code - header, result text, line terminator, or trailer - is
transmitted.
<value> Description
0 DCE transmits result codes. Default value
1 Result codes are suppressed and not transmitted
3.2 ATS0 Automatic Answer Control
Description Command Possible Responses
Automatic answer
control
ATS0=[<rcnt>]
•_ OK
•_ ERROR
Read the current
setting
ATS0? <rcnt>
Show if the command
is supported
ATS0=? S0: (list of supported
<rcnt>s)
Defines the automatic answering feature of the modem. A non-zero value
specifies the number of rings before the call is answered.
Note! Call is always answered in the current fax class,
regardless of whether the incoming call is voice, data, or
fax.