Filter
Top Products
Owner’s Manual Rev 1.0 Page 253 of 253
Read the current setting
AT*EIPS?
•_ *EIPS: <ID1>,<alphatag
mode1><CR><LF>
*EIPS: <ID2>,<alphatag
mode2><CR><LF>
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
Test if the command is
supported and list the
possible settings
AT*EIPS=?
•_ *EIPS: (list of supported
ID>s),(list of supported
<alphatag mode>s)
•_ +CME ERROR: <err>
•_ OK
•_ ERROR
This command enables or disables the presentation of the alpha tag of the
Caller ID and Called ID to the TE if the ID is recognized. The alpha tag is the
first name and the last name. The presentation is done by an unsolicited
result code, *ELIP for Caller ID and *EOLP for Called ID.
<ID> Description
1 Caller ID (*ELIP)
2 Called ID (*EOLP)
<alphatag mode> Description
0 Off
1 First name and last name displayed
Unsolicited Result Codes:
*ELIP:<alpha tag>
*EOLP:<alpha tag>
16.8 AT*ELIN Ericsson Line Set
Description Command Possible Responses
Set the current line to
<line>
AT*ELIN=<line>
•_ *ELIN: <line>
•_ +CME ERROR: <err>
•_ OK