Filter
Top Products
Owner’s Manual Rev 1.0 Page 152 of 152
Network
11.1 AT*E2CD Ericsson M2M Cell Description
Description Command Possible Responses
Request network cell
description
AT*E2CD=<n>
•_ ERROR
•_ OK
Read the command AT*E2CD?
•_ *E2CD:
<n>,<lac>,<ci>,<ta
>
•_ ERROR
Show if the command is
supported
AT*E2CD=?
•_ *E2CD: (list of
supported <n>s)
•_ ERROR
Controls the presentation of an unsolicited result code E2CD: when <n>=1,
or when there is a change in one of the network cell parameters, E2CD:
<lac>,<ci>,<ta>.
Read command returns the status of result code presentation and several
values, which show the network cell parameters.
Location information <lac>, <ci> and <ta> are returned only when <n>=1
and the ME is registered in the network. To know if the ME is registered use
the AT+CREG command. If the ME is not registered in the cellular network an
ERROR message is returned.
<n> Description
0 Disable network location information unsolicited result
code. Default value
1 Enable network location information unsolicited result
code *E2CD: <lac>,<ci>,<ta>
<lac> Description
String type Two byte location area code in hexadecimal format
<ci> Description