Filter
Top Products
AR-B7041 User¡¦s Guide
1-2
1.2 PACKING LIST
The accessories are included with the system. Before you begin installing your AR-B7041 board, take a moment
to make sure that the following items have been included inside the AR-B7041 package.
l The quick setup manual
l 1 AR-B7041 solid state disk card
l 1 Software utility
If you purchased an AR-B7017, please check that the following items have been included in the AR-B7017
package.
l 1 AR-B7017 ROM/RAM disk card
l 6 Mounting screws (2 for spare)
l 3 Mounting standoffs (1 for spare)
l 1 2-wired battery cable
NOTE: If there are any discrepancies, please contact your Acrosser distributor immediately.
1.3 FEATURES
The system provides a number of special features that enhance its reliability, ensure its availability, and improve its
expansion capabilities, as well as its hardware structure.
l ISA bus add-on card designed for PC/XT, PC/AT systems.
l Fully compatible with standard floppy disk drive
l Eight 32-pin JEDEC DIP sockets
l Maximum capacity of 8MB EPROM, 4MB FLASH/SRAM or combinations
l One AR-B7017 piggy back modules can be carried by AR-B7041 and have a maximum of 12MB
disk capacity
l Accepts 128Kx8 to 1Mx8 EPROM
l Accepts 64Kx8 to 512Kx8 5V FLASH EPROM
l Accepts 128Kx8 to 512Kx8 SRAM
l Software and hardware write protect functions
l 850mAH Lithium battery for SRAM data retention. External battery connector also included
l Supports on-board FLASH EPROM programmer and programming utility
l Switch selectable drive unit (8 combinations of A:, B:, C: or D:)
l Switch selectable of I/O and memory address. Occupies only 4 I/O address and 16KB memory
address
l Programmable watchdog timer
l LED indicator for disk data access and watchdog timer status