Filter
Top Products
33
6. Click on the Setup button.
You will see a window which looks like
the one on the right.
In the Setup window, you can change the
Paper Size, Orientation and make any
further adjustments you need through the
Options button. For additional informa-
tion on these features and advanced op-
tions click on the Help button.
7. Click OK to exit the Setup window and
to save your changes.
8. Click on Close to exit the Printers Menu
and to save your printer selection.
9. Click on Settings and select Exit to exit
the Control Panel window.
Note: If you have a file saved in PostScript language format (.EPS files) you
can print from the MS-DOS command line from within Windows. At
the command line prompt, type:
COPY/B <filename.ext> TO LPT1
where <filename.ext> is the name of your PostScript-formatted file.
If you have your printer configured to print to a different parallel port,
give its name instead of LPT1.
Fonts in PostScript Mode
The PostScript mode supports all TrueType fonts, Type 1 fonts (ATM) and Intellifonts
for Windows. The WinType 4000's PostScript mode also emulates the original 13 resi-
dent PostScript printer fonts by substituting these fonts as TrueType fonts. The substitu-
tions are as follows.
Original PostScript Font Name TrueType Substitute
Helvetica Arial
Helvetica Bold Arial Bold
Helvetica Oblique Arial Italic
Helvetica BoldOblique Arial BoldItalic
Courier CourierNew
Courier Bold CourierNew Bold
Courier Oblique CourierNew Italic
Courier BoldOblique CourierNew BoldItalic
Times Roman TimesNewRoman
Times Roman Bold TimesNewRoman Bold
Times Roman Oblique TimesNewRoman Italic
Times Roman BoldOblique TimesNewRomanBoldItalic
Symbol Symbol