Filter
Top Products
Execute < ESC > “A”
Mode
ASCII
Decimal Hexadecimal
IBM
<ESC> “2”
21 50 IB 32
Sets the line spacing to the value defined by the last preceding < ESC >
“A” command. Sets the line spacing to l/6 inch if there is no preceding
< ESC > “A” command.
Line feed
Mode
ASCII
Decimal Hexadecimal
Both
<LF> 10 OA
Prints the current line and feeds the paper to the next line. If DIP switch I
l-2 is ON, also moves the next print position to the left margin. See the
preceding commands for the line spacing.
Reverse line feed
Mode
ASCII
Decimal Hexadecimal
Both 1
<ESC>
<LF> 127 10
IIB OA
I
Prints the current line and feeds the paper in the reverse direction to the
preceding line. If DIP switch 1-2 is ON, also moves the next print position
to the left margin. See the preceding commands for the line spacing.
Ignored when friction feed is used.
Perform one n/276-inch line feed
Mode
ASCII
Decimal Hexadecimal
Both
< ESC > “J” n
21 74 n 1B4A n
Feeds the paper once by n/216 inches, where n is between 1 and 255.
Does not move the print position right or left when DIP switch l-2 is
OFF. Does not change the line-spacing setting. Ignored when friction
feed is used.
Perform one n/276-inch reverse line feed
Mode
ASCII
Decimal Hexadecimal
Both
< ESC > “j" n
27 106 n lB6A n
Feeds the paper once by n/216 inches in the reverse direction, where n
is between 1 and 255. Does not move the print position right or left when
DIP switch l-2 is OFF. Does not change the line-spacing setting. Ignored
when friction feed is used.
72