Filter
Top Products
By moving the cursor and pressing the Fl, F2, and F3 keys you can
quickly build up the dot pattern. If necessary you can clear all dots by pressing
F4 and start over. When the character is complete, press Return to store
the dot data in the computer’s memory. The program will clear the character
box and ask you to select the next character to design.
When you have finished designing characters, press the F6 key. The
program will ask you whether you want to save, download, and print the
characters you have designed. If you answer Yes to all three questions, your
characters will be saved on a disk file and downloaded to the printer, and
the entire character set from character 33 (!) to character 126 (-) will be
printed out.
At any point while you are selecting or designing characters you can
press F5 to skip the current character and proceed to the next character.
The program does not allow you to redefine the space character, or to
define any other character as an all-blank character. Nor can you assign
character codes less than 33 or greater than 126 to the characters you define.
L
NLQ character
First ml...
. ..m23
pass m24...
.m46
12831
64
32
16
Dot dr
3ta
1st: 14 33 70 70 126 0 0 0 9 9 6 0
16 I I 0 0 70 39 22 6 6 6
Second
pass
,28 ASCII Code 33
Descender
I
e4 Left space:
0
Right space: 0
32
m0 = Descender x 128
16
+ (Left x 16) + Right
8
4
2nd: 26 14 14
14 f24 0 64 32
16 0 0 0
32640 0 0 12 12 14 14 14 12
Figure C-2. Car symbol, near letter quality