Filter
Top Products
L.
Actual printing begins in line 1120. Using the preassigned commands,
the program prints samples of its different type styles, including a line
showing all styles in italics, followed by samples of the print pitches, then
some double and quadruple-sized printing.
Next comes the central attraction of the program: a line of text printed
fourteen times in expanding and contracting loops to give a barrel effect.
The work is done by four printer commands: a command setting the right
margin (line 1460); a centering command (line 1480); a command to vary
the line spacing (lines 1500 and 1550); and a command to micro-adjust the
space between characters (lines 1510 and 1560).
Next the program returns to normal spacing and gives a demonstration
of the printer’s word-processing abilities: outlined printing, bold printing,
underlining, subscripts, etc.
The row of telephone symbols in the next printed line is created by
downloading two new character patterns, which are printed in place of the
character “ < ” (character 60). Details can be found in Appendix C.
The final part of the program uses dot graphics to print an “S&S” logo.
The dot pattern of the logo was originally laid out on graph paper, then
converted to the data in lines 3240 to 3630 with the help of a calculator.
Each number represents eight vertical dots. (See “Graphics commands” in
Appendix B for details.)
The pattern is printed in four rows, each eight dots high and 100 dots
wide. Lines 1980 to 2050 read the dot data into a string array variable named
LOGO$. Line 2060 sets the line spacing to 8/60 inch so that the rows will
connect vertically. The loop in lines 2070 to 2120 does the printing in four
passes of the print head.
This program can also be run in IBM mode (DIP switch 1-6 OFF) if
you change a few of the lines as shown below to allow for differences in
some of the commands. You will get a cylinder instead of a barrel effect,
becuase the IBM mode does not have any command to micro-adjust the
character spacing.
Modifications for IBM mode:
1090 PI$=CHR$(18)
'Pica pitch
1190 LPRINT CHR$(28);"4"; 'Select italics
1220 LPRINT CHR$(28);"5n
'Cancel italics
1260 '
LPRINT H$;E$;"g";"
Semi-condensed pitch (15 CPI),";
1300 '
LPRINT H$;E$;"M";"
Condensed elite pitch (20 CPI),";
1400 ' LPRINT H$;CHR$(28);"
E";CHR$(2);"Triple width,";
1460 LPRINT CHR$(28);"Q";CHR$(47) 'Set right margin
1500 LPRINT E$;"A";CHR$(I);E$;"Z"; 'Set line spacing
1510 '
LPRINT ES;" ";CHR$(I):
'Increase character space
1550 LPRINT E$;"A";CHR$(I);E$;"2"; 'Set line spacing
1560 '
LPRINT ES;" ";CHR$(I);
'Increase character space
43