Filter
Top Products
Set page length to n inches
IModel ASCII
I
Decimal
I
Hexadecimal I
Both <ESC> “C” CO> n 27 61 0 n 1B 43 00 n
Sets the page length to n inches, where n is between 1 and 22 in Standard
mode or between 1 and 127 in IBM mode. The current line becomes the
top of the page.
Set top margin
1 Model ASCII
I
Decimal
I
Hexadecimal I
Both < ESC > “c” n 27 99 n 1B 63 n
Sets the top margin to n lines, where n is between 1 and 255. Printing
begins on the (n + 1)th line on the page.
Set bottom margin
Mode 1 ASCII Decimal Hexadecimal
Both 1 <ESC> “IV n I27 78 n IlB 4E n
I
Sets the bottom margin ton lines, where n is between 1 and 127 in Standard
mode or between 1 and 255 in IBM mode. The bottom margin is reset
when you change the page length.
Cancel top and bottom margins
Mode ASCII Decimal Hexadecimal
Both
<ESC> “0”
I21 79 11B 4F
Cancels both the top margin and the bottom margin.
Form feed
Mode ASCII
Decimal
Hexadecimal
I
Both 1
<FF>
1 12 lot
Feeds the paper to the top of the next page according to the current page
length, and moves the print position to the left margin. When the auto-
matic sheet feeder (ASF) is selected (DIP switch l-4 is OFF), this com-
mand ejects the current page.
Return to top of current page
Mode ASCII
Decimal Hexadecimal
Both 1 <ESC>
<FF> (27 12 IlB OC
1
Feeds the paper backward to the top of the current page. Ignored when
friction feed is used.
72