Filter
Top Products
5. Insert the sheet from the back side of the platen (between
the paper chute and the platen cover plate).
6. Press the ON LINE button until the ON LINE light goes
off.
7. Press the L.F. button to roll the paper in until it appears
on the front side of the platen, about where you want
the first line to start printing.
NOTE: To straighten paper (if it’s in crooked):
l Move the release lever to “T” position.
l Position the sheet where you want it, moving right or
left if necessary to get the paper located between the
margins of the printing area.
l Move release lever back to “F” position.
8. Push the paper bail bar back to its original position, flush
against the paper.
9. Replace the printer cover.
10. Presto! You’re ready to start printing!
kgure 2-5. Inserting a single sheet of paper can be done
“under power”
with the line feed button.
n Loading sprocket-feed paper
This is the familiar perforated paper, with the holes along both
sides, also called sprocket, punched, fan-fold, or just plain
15