Star Micronics SB-15 Printer User Manual


 
By combining expanded print with the four pitches, SD-lo/l 5
has eight different character widths available.
Enter this program to see how the print pitches and expanded
print can be combined:
191 'Demo pitches in cqmbination with expanded mode.
20 LPRINT CHR$(27) "W" CHR$(l) ; 'Permanent expanded
mode on.
30 LPRINT CHR$(27) "B" CHR$(3) ; 'Select condensed
pitch.
40 LPRINT "This line is EXPANDED CONDENSED pitch."
54) LPRINT CHR$(27) "B" CHR$(2) ; 'Select elite pitch.
60 LPRINT "This is EXPANDED ELITE."
74) LPRINT CHR$(27) "B" CHR$(l) ; 'Select pica pitch.
80 LPRINT "This is EXPANDED PICA."
90 LPRINT CHR$(27) "p" CHR$(l) ; 'Select proportional
180 LPRINT "This is EXP. PROPORTIONAL."
110 LPRINT CHR$(27) "p" CHR$(@) ; 'Cancel proportional.
120 LPRINT CHR$(27) "W" CHR$(Q)) ; 'Permanent expanded
mode off.
130 LPRINT "This is UNEXPANDED PICA pitch (default)."
If you are using with the IBM mode, change the following lines
to the program given above.
34) LPRINT CHR$(27) CHR$(15) ; 'Select condensed pitch.
50 LPRINT CHR$(27) "Ml' ; 'Select elite pitch.
70 LPRINT CHR$(27) "P" ; 'Select pica pitch.
Here’s what you should get from this program:
-
This line is EXPANDED CONDENSED pitch.
Thi5
ils EXF’GNDEID ELETE,
-
'Thi 5
i 53 EXF=.CiNDED
F’ICA, -
This is EXF-,
PHC3POF3TION#=ml-, -
This 1.5
UNEXF'ANDED F'ICA pitch (default).
In addition, the NLQ characters can be printed with expanded
print as shown below.
This ic,
normal pica.
This is normal NLR.
This is
EXPRNDED
NIL-C;1 -
Thi5 i5
EXF’ANDEID
pica.,
-
44