Filter
Top Products
When you run this program it will print 150 lines right down
the page and across the perforations. When it’s done line 60 sends
a form feed to advance the paper to the top of the next page.
Look at the lines that have printed near the perforations. Separate
the sheets and see if any of the lines have been torn in half.
These
are the problems that the top and bottom margins will solve.
Now add the following lines to your program. (Don’t forget
the semicolons or you won’t get quite the same results that we
did.)
11 'Leave 6 blank lines at bottom of page.
12 LPRINT CHR$(27) "N" CHRS(6) ;
13 'Start top of page at line 6.
14 LPRINT CHR$(27) "R" CHR$(6) ;
55 LPRINT CHR$(27) "0" ;
'Clear top & bottom margins.
Now when you run the program with STAR mode SD-lo/l 5
will skip the first six lines and the last six lines on each page.
-
-
-
-
-
.-
-.
-
-